A-109 Small/Medium Anti-Bark Bark Control

The characters of our product :

1The newest intelligent transmission system is capable to identify the sound of the dogs and will make static to restrain the dog automatically .Besides, the stop” function won’t work if the sound isn’t from the right dog .In that case, we can avoid making mistakes.

2The set won’t make static at the first bark , but if the bark last , the static will get stronger gradually from the second bark to the sixth bark .And if the bark continue even at the strongest static levelthe set will stop automatically for about 2 minutes and then get right .

3The impulse static is safe and effective .Just like we touch the electrostatic objects, surprisingly and innocuously .

4The allowable bark degree is adjustable. The master can decide the bark degree according to their need.

5The small batteries are easy to change .It costs a little electric power while working and the life of batteries standing by can last more than 60 days .

6The nylon collar is easy to adjust and comfortable to wear

7The waterproof collar is small and light.

the system includes :

1 a waterproof static set

2 a nylon collar which is easy to adjust and wear

3 two small batteries which are easy to buy :CR2032

4two pairs of exploration poles suit to varies of fur length

5 a test bulb

6 a special screwdriver used to adjust the allowable bark level

preparation before using

1.0 test and adjust the static collar

1.1 How to install the batteries :

1.1.1 open the round cover

1.1.2Make the anode of the battery upward , and put the battery into the battery tray aslant

1.1.3 Press the battery to make sure it won’t get out after being fixed

1.1.4 Observe the LED indicative light , it will flash once every 5 seconds or just once every second in the case ofthe exploration pole has signal

1.2 Take down the batteries

1.2.1 Open the round cover

1.2.2 Use the screwdriver to press the spring leaf locating on the right side of the battery tray , then the right side of the battery will spring out .

1.2.3 Let the battery in inversion and get it out

1.3 Test the static set

1.3.1 Please adjust the allowable bark level to the lightest level (counterclockwise), which is convenient to test the static phenomenon .

Please notice that the adjustment has only half of the circle (180 dimension).Don’t revolve it overly , or it will be damaged .

1.3.2 Let the exploration pole slide along the firm and non-glassed surface lightly .While sliding , it will make a vibration which resembles with the vibration of the sound track , causing the set to release the static ,and the LED light will flash.

1.3.3LED light turn to flash quickly at the first slide ( is equal to the first bark ), reaching flashing once every second , it also flashes quickly at the second slide in the case of the static standing by ,making the pa-pa” sound showing that the static is released .When the exploration pole is connected to the test bulb , the bulb will flash. Between the two slides ,3 to 5 seconds is the safe period . The static will get stronger if it is caused by continual bark .

1.3.4 After the static happen caused by the sixth bark ,the static set will stop for about 2 or 3 minutes safely and then it will recove